Zeal ZePace Premimum 4T 10W40 SM is designed with high-quality base stocks and advanced technology additive system to provide a high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most motorcycle manufacturers and is suitable for use in 4 stroke gasoline engines, naturally aspirated or turbo charged engines, operating in all-around seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels.
Product Description & Specifications
Features & Benefits
- Excellent oxidation & thermal stability helps in extending oil drain intervals.
- Very good shear stability and excellent viscosity-temperature behavior.
- Superior protection against viscosity and thermal breakdown.
- Excellent detergency and dispersancy, reduces sludge formation which improves engine cleanliness.
- Superior sludge protection for greater engine reliability.
- Enhanced wear protection and improved engine cleanliness.
- Easier cold starts and improved fuel economy compared to mono-grade engine oils.
Specifications
Zeal ZePace Pearl 4T 10W40 SM meets or exceeds following International and Builder specification:
- API SM
- JASO MA 2
- JASO 4T Clutch performance
Application
Zeal ZePace Pearl 4T is suitable for use in the following:
- Motorcycle 4 Stroke gasoline engines.
- Naturally aspirated or turbocharged engines.
Typical Characteristics
| Zeal ZePace Pearl 4T | Test Method | Units | 10W-40 |
|---|---|---|---|
| Density @ 15 °C | ASTM D 4052 | gm/cc | 0.870 |
| Viscosity @ 100 °C | ASTM D 445 | cSt | 14.30 |
| Viscosity @ 40 °C | ASTM D 445 | cSt | 95 |
| Viscosity Index | ASTM D 2270 | – | 155 |
| Pour Point | ASTM D 97 | °C | -36 |
| Flash Point (COC) | ASTM D 92 | °C | 230 |
| Total Base Number | ASTM D 2896 | mg KOH/g | 8.4 |
| Phosphorous | ASTM D 4951 | % wt | 0.098 |
| CCS Viscosity | ASTM D 5293 | cP | 5650 @ -25 °C |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
