Zeal Zepower C5-50-CD is a range of diesel engine oils formulated with high quality base stocks and selected additives to ensure optimum performance and protection for diesel engines requiring an API CH-4 specification. Suitable for heavy duty, high output diesel engines where monograde oils are specified. It provides excellent protection in engines, against high temperature piston deposits, wear, corrosion and foaming under severe operating conditions.
Product Description & Specifications
FEATURES & BENEFITS
- Improved fuel economy & easy cold starts due to good fluidity at low temperatures.
- Reduces power robbing friction across engine speeds and conditions
- High resistant oil film even at high engine operating temperatures.
- Excellent detergency and dispersancy, reduces sludge formation which improves engine cleanliness.
- Excellent oxidation & thermal stability, helps in extending oil drain intervals.
- Superior wear protection for greater engine reliability and performance.
SPECIFICATIONS
Zeal Zepower C5-50-CD meets or exceeds following International and Builder specifications:
- API CD
- ACEA E7/A3/B4
- Caterpillar TO-2
- MTU OIL Category-1
- Deutz DQC –I-05
- MAN 270/271
- Allison C3 (SAE: 30)
- MB 228.0/1
- Detroit Diesel 7SE-270
APPLICATIONS
Zeal Zepower C5-50-CD is suitable for use in,
- Suitable for use in heavy duty 2-stroke & 4-stroke turbocharged and naturally aspirated diesel engines.
- It can be used in both On-highway light and heavy duty trucks & construction and mining equipment, where high or low sulfur diesel is used.
- Suitable for certain stationary equipment, such as pumps that run continuously under steady state conditions.
TYPICAL PHYSICAL CHARACTERISTICS
| ZEAL ZEPOWER C5 | Test Method | Units | SAE 50 |
| Density @ 15 0C | ASTM D 4052 | gm/cc | 0.904 |
| Viscosity @ 100 0C | ASTM D 445 | cSt | 20.2 |
| Viscosity @ 40 0C | ASTM D 445 | cSt | 234 |
| Viscosity Index | ASTM D 2270 | – | 99 |
| Pour Point | ASTM D 97 | °C | -18 |
| Flash Point (COC) | ASTM D 92 | °C | 242 |
| Total Base Number | ASTM D 2896 | mg KOH/g | 8.0 |
| Sulfated Ash | ASTM D 4951 | % wt | 0.85 |
These characteristics are typical of current product methods whilst future production will confirm to Zeal lubricants specifications, variations in these physical characteristics may occur.
